Jet 707000 10-Inch Jobsite Table Saw With Stand Review

Jet 707000 Table Saw Description

The Jet 707000 10-Inch Jobsite Table Saw With Stand is both powerful and portable. This table saw has a powerful 4.4HP as well as heavy duty 15 Amp motor with soft start. At each ends of the table, there are rubber hand grips which are conveniently placed to carry it without the stand. Plus, the base was uniquely designed which allows you to store tools on the job site. The Jet 707000 has an extension wing which is large and telescoping that provides a wide 25″ ripping capacity. For added safety, it has an anti kickback pawls and a riving knife. It also sports a heavy-duty folding stand with wheels which allows for quick setup and portability. The Jet 70700 weighs in at just under 100lbs, which brings the stability of a stationary table saw to your jobsite, then when you are done, it can be rolled away.

Jet 707000 Table Saw Features

• Powerful 4.4HP and heavy duty 15 Amp motor with soft start
• Convenient storage with easy folding stand
• Quick setup and portability
• Rubber hand grips located on each end of the table which allow you to conveniently carry without stand
• Base was uniquely designed which allows you to store tools on the job site
• Large telescoping extension wing that provides a wide 25″ ripping capacity
• Enhanced dust and chip removal with unique dust shroud design
• Rails are aluminum extruded to ensure a square fence and sliding precision
• The work piece is kept flat by the rear extension which also provides out feed support
• To prevent kickbacks, there is a new riving knife system which also complies with UL standards
• For easy and quick blade changes, there is a convenient push button arbor lock
• For accurate cuts, the quick-lock fence slides smoothly and locks securely

Jet 707000 Table Saw Includes

• 707000 Jobsite Table Saw
• Stand

Jet 707000 Table Saw Specifications

• Model Number: 707000
• Blade Diameter: 10-Inches
• Arbor Diameter: 5/8-Inches
• Arbor Speed: 4000 RPM
• Maximum Depth of Cut: 3-1/8 Inches
• Maximum Depth of Cut at 45 Degrees: 2-1/2 Inches
• Maximum Rip Right of Blade: 25-Inches
• Table Size With Standard Extension: (L x W) 30-1/4 Inches x 21-25/32 Inches
• Table Size Without Extension: (L x W) 24-Inches x 21-25/32 Inches
• Dust Port Outside Diameter: 2-1/2 Inches
• Motor Voltage: 120-Volt
• Motor Current: 15 Amps
• Motor Phase: 1 Ph
• Height: 20-Inches
• Width: 31.7-Inches
• Length: 45.5-Inches
• Net Weight: 90.39 lbs
• Weight: 100 lb(s)

Jet 707000 Table Saw Impressions

The Jet 707000 10-Inch Jobsite Table Saw With Stand is a great saw to have at your jobsite because it is powerful and portable. It has a soft start,rubber hand grips, a uniquely designed base, a large telescoping extension wing, has a quick setup as well. If you are looking for a portable and powerful jobsite saw, then this is the one for you. The MSRP on the Jet 707000 $819.00, but you can buy it for as low as $599.99 at Tool King.

Jet 707120 12-Inch Sliding Compound Miter Saw Review

Jet 707120 Sliding Compound Miter Saw Description

The Jet 707120 12-Inch Sliding Dual Bevel Compound Miter Saw is powerful and has been designed to make your toughest jobs easy. This compound miter saw provides power, precision and performance. It has a 15 Amp ball bearing motor with electric brake and is made of light weight die cast aluminum which makes transport a breeze. Changing miter settings is easy with the quick cam miter lock table. High visibility for precision cutting is provided by the innovative Green XACTA LaserTM, which is a high performance laser system created exclusively by JET®.

Jet 707120 Sliding Compound Miter Saw Features

• Heavy Duty 15 Amp motor
• Convenient portability with multiple rubber carrying handles
• Easy transport due to lightweight die cast aluminum design
• Transporting is easy with the integrated cord wrap, plus it ensures workshop safety
• Base is versatile- can be a stand or work bench
• Table is die cast aluminum for long lasting durability
• The work piece is stabilized by the hold down clamp which ensures an accurate cut
• Knobs are oversized and ergonimic which gives maximun control and easy use
• High visibility for precision cutting is provided by the innovative Green XACTA LaserTM
• Control are up front for safety and easy use
• Angle and stop at 0°, 33.9°, and 45° left and right with dual bevel capability
• Conveniently adjust and stop at 10 detents: 0°, 15°, 22.5°, 31.6°, 45° left and right and 60° right with quick cam miter lock
• Over-molded handle is ergonomic and D-shaped for maximum control during cutting applications
• The fence has an easy slide and and extends further to support the work piece on both sides

Jet 707120 Sliding Compound Miter Saw Specifications

• Model Number: 707120
• Motor Current: 15 Amps
• Blade Speed: 4200 RPM
• Blade Diameter: 12-Inches
• Bevel Type: Dual
• Slide: Yes
• Miter Stops: 10 stops, -45° to 60°
• Bevel Stops: 0°, 33.9° and 45° left & right
• Miter Capacity: 45° left – 60° right
• Arbor Size: 5/8-Inch with 1-Inch Collar
• Cut Capacity At Cross: 4-Inch x 12-1/4 Inches
• Height: 22.8-Inches
• Width: 26.3-Inches
• Length: 37.4-Inches
• Saw Weight: 72.6 lbs
• Weight: 80 lb(s)

Jet 707120 Sliding Compound Miter Saw Impressions

The Jet 707120 12-Inch Sliding Dual Bevel Compound Miter Saw provides power, precision and performance. It has an electric brake, is made of light weight die cast aluminum, a quick cam miter lock and an innovative Green XACTA LaserTM. This miter saw is perfect any sawing or cutting application that needs to be done. The MSRP on the Jet 707120 is $909.99, but you can buy it for as low as $699.99 at Tool King.

Jet 354203 20 Inch Drill Press Review

Jet 354203 20 Inch Drill Press Description

The Jet 354203 is a variable speed 20 Inch Drill Press with 1-1/2 Inch Drilling Capacity. Its powerful motor is UL listed with 2 HP, 3 Ph and 230 Volts. The Drill press has a front mounted dial that easily changes the variable spindle speeds which ranges from 150-2000 Rotations Per Minute. Plus it is easy to use because the operating controls are conveniently located, and it comes with controls that are tapping and reversing. Large work pieces are easy to handle on the large production table which also has a quick release clamp. Plus, the table is in the shape of a “T” and is slotted for your convenience. In addition,there is a standard internal depth gauge that is easy to read.

Jet 354203 20 Inch Drill Press Features

• Motor has 2HP, 3Ph and 2 speed 230 Volts
• Motor is UL listed
• Spindle speeds are variable and range from 150-2000 RPM
• Front mounted dial easily changes spindle speeds
• Operating controls are conveniently located
• Production table and base are large which easily handles large work pieces
• Quick-release clamp located on the table
• Internal depth gauge is easy to read
• Controls are tapping and reversing

Jet 354203 20 Inch Drill Press Parts

• T-slotted worktable
• Internal depth stop

Jet 354203 20 Inch Drill Press Specifications

• Model Number: 354203
• Drilling Capacity: 1-1/2Inch
• Voltage: 230
• Variable Speed: Yes
• HP: 2
• Phases: 3
• Spindle speeds: ranging from 150-2000 Rotations Per Minute (RPM)
• Weight: 823 lb(s)

Jet 354203 20 Inch Drill Press Impressions

The Jet 354203 is a variable speed 20 Inch Drill Press with 1-1/2 Inch Drilling Capacity is a great drill press to have in your workshop. The motor has 2 HP, 3 Ph and 230 Volts plus, it is UL listed. With its front mounted dial and operating controls conveniently located, it is easy to use. Plus it has a large production table that is T-shapped and slotted which also has a quick release clamp and an internal depth gauge. The MSRP on the Jet 354203 variable speed 20 Inch Drill Press with 1-1/2 Inch Drilling Capacity is $3910.00 but you can buy it for as low as $2899.99 through Tool King.