Mixing Multiple Floor Coverings in Your Home

Dear Rob:

Is it acceptable to mix flooring types in the same home?

-Brenda in New Hampshire

Dear Brenda:

In short, absolutely!

Below are some guidelines to help you plan your flooring project. Keep in mind that these are guidelines and not set rules because each house and personal taste varies so much.

Mixing Hardwood

As a general rule, it is best to keep the hardwood on one floor of your home the same species and color. However, certain circumstances make it acceptable to change the species and color if the room is completely separated by a door.  It is also best to keep the hardwood in a home running the same direction unless a different room is completely separated by a door.

Keep in mind that if you use multiple woods on multiple levels or multiple woods on the same level you may lose some flow and continuity as well as any bulk purchasing discounts offered from the retailer.

Mixing Tile

Tile is the easiest product to mix in a home. You can have a common area tile that is the same while changing the tile in each bathroom. You can use the same tile in a common area and change sizes, styles or colors within that common area. You can also use one common tile throughout the areas with tile in the home mixing in different accents within those areas to define each room. With floor plans being more open and hard surfaces being used more throughout the home, more opportunities are available to mix tiles. All you need is a transition point or door to change tiles (style, direction or color).

Using different tiles in each area can give each room its own personality. If the tiles are intended to be more restful or a serve as a background than a focal point that is perfectly acceptable as well! A circumstance where you may want to consider using all of the same tile is if you have rooms with patterned wallpaper.

Mixing Carpet

Let’s say you have hardwood or tile in the common areas of your home. A great place to break up and change the flooring is by using carpet in the bedrooms. Because each bedroom has a door, you can choose different styles and colors for each bedroom to suit the décor of that room.

Another reason to mix carpet in a home is if the main carpet color chosen does not coordinate well with all of the other wall colors in the home.

Tile, carpet and hardwood all mix well with each other as well. From room to room each of these products can transition well to each other.

An idea to help you determine if you are mixing the right amount of floor coverings is to go back to kindergarten – and color. Create a drawing or make a copy of your floor plan and use different colors to outline each type of flooring. When coloring rooms with hardwood, draw lines indicating the direction the hardwood will be installed. When drawing tile, draw squares indicating the direction the tile will be installed. Also, use different colors for each different tile used. For carpet, color the rooms solid. This will help you determine the degree that your floors are either being used for a background or if they are going to be more of a focal point.

-Rob

Scratched Hardwood Repair Looks Dull

Dear Rob:

I touched up a scratch on my red oak hardwood floor using the same finish that the floor contractor used and it looks duller then the rest…… it was a oil based finish called Fabulon.

-Kim From Alabama

Dear Kim:

I am sorry to hear about your scratched hardwood floor problem. Dull finish or mismatched finish is very common when blending scratch repairs on hardwood floors, and there could be several reasons for this:

1. You may not have stirred the polyurethane well enough before applying it.  If you only dipped your brush into the top of the finish, without stirring well, that may have led to your finish not being shiny.
2. You may have used the right material, but the wrong sheen.  If you didn’t use a can of polyurethane that was left over from your project, call whoever applied the finish to double check what sheen they used.
3. If you sanded the area around the scratch, you may not have applied enough polyurethane in the sanded area, resulting in a dull area because the finish is thinner in that area.

It’s tough to know for sure which of these possibilities applies to your situation, but hopefully they will get you started with solving your problem.

I recommend that you carefully outline with tape the adjacent boards along their edges and then gently scrape the area that you originally touched up with a hand held floor scraper that you can get from any big box home retailer.  That will take the finish back down to nearly bare wood, but do not go all they way down.

I would properly stir, not shake, the polyurethane.  Then carefully apply a thin coat of finish.  Let that coat dry and repeat. If all went well, your floor should be as good as new.

-Rob

Fixing Dull and Shiny Spots in Hardwood Floor Finish

Dear Rob:

I recently had my floors refinished and the poly came out very uneven. Some places it’s really shiny and others, its very dull. Any ideas on a quick fix to even it out? I have to move furniture into these rooms this weekend.

-Lacey G. from Merrimack, New Hampshire.

Dear Lacey:

I assume that you have a polyurethane floor, so I will base my answer on that. The dull and shiny spots in your hardwood floor indicate that your installers did not apply the finish correctly.

Dull spots in polyurethane floors usually indicate that the finish was not applied carefully, the applicator had a dry spot on it, or the finish was thinned out with a solvent such as mineral spirits. The latter is a big mistake, but a common shortcut in the industry among people trying to save money on materials.

Shiny spots in polyurethane floors can be caused by the finish not flowing out properly and pooling in areas, or inconsistent screening between coats of finish.

There is no quick fix for this, what I recommend is that you have the refinishers come back and screen and coat the floor. A screen and coat is a procedure where the floor is lightly sanded (or screened) with a floor maintainer or buffer, instead of a floor sander. This light sanding evens out the finished, cleans away debris, and roughens the surface, so another coat of finish will be able to properly adhere to the existing finish.

There is no other way to even out the finish.

-Rob

« Previous Page