Senco SNS44XP Heavy Wire Construction Stapler Review

Senco SNS44XP Heavy Wire Stapler Description

The Senco SNS44XP Heavy Wire Construction Stapler provides a blend of power and control. The depth that the SNS44XP drives staples can be adjusted by a simple one screw, one step process allowing you to adjust the depth of the drive by one inch. The main body and high stress area is built of magnesium to strengthen it and increase tool life while keeping the overall tool light. The SNS44XP comes with two methods of actuation. It you are in a hurry you can set it to contact or dual action actuation. This allows you to pull the trigger before placing the workpiece contact on the contact place. Then each time the workpiece contact is depressed the stapler will actuate, placing one staple. for added safety there is also a sequential trigger mode which requires you to first depress the workpiece contact then pull the trigger once per actuation. In addition to these features the SNS44XP also has several comfort features as listed below.

Senco SNS44XP Heavy Wire Stapler Features

• Main Body s built of Magnesium
• Drives 7/16″ crown 16 ga. staples from 1″ – 2″
• Depth of Drive is Adjustable
• Tool Oil Required
• Easy Clear Jam Clearing enables quick and easy clearing of occasional jams
• Two-Year Warranty
• Durable Over-Mold comfort grip
• 360 Degree Adjustable Exhaust
• Overmold trigger
• Reduced weight for less operator fatigue

Senco SNS44XP Heavy Wire Stapler Specifications

• Item #: 3B0101N: Contact Actuation (Dual Action)
• Weight: 4.4 lbs. ( 2 kg)
• Height: 11″ (279.4 mm)
• Length: 14″ (355.6 mm)
• Lip Length: 1″ (25 mm)
• Staple Capacity: 160
• Operating Pressure: 80-120 psi
• Mode of Operation: Tool is available with either sequential
  or contact actuation trigger mechanism
• Hose Fitting: 3 /8″ NPT
• Crown 7/16″ (11 mm)
• Width: .062 (1.57 mm)
• Thickness: .055 (1.4 mm)
• Capacity 160
• Staples: 16 ga. staples from 1″ (25 mm) – 2″ (50 mm)

Senco SNS44XP Heavy Wire Stapler Impression

The Senco SNS44XP Heavy Wire Construction Stapler is an excellent example of an air driven Stapler. The combination of a Magnesium body and the over-mold comfort grip makes it light and easy to handle while still having the power of its high pressure to place staples into whatever materials you are likely to need. The MSRP on this item is $349.00 but you can buy it for as low as $279.99 at Tool King.