The Grip 22180 Seal Puller Description

The Grip 22180 is 13 inch long and features a double sided hook that fits any type of seal. The length of the tool has been meticulously calculated to maximize the leverage giving the Grip the ability to pull out seals almost effortlessly. The Grip 22180 works great for oil and grease seals when servicing cars, SUVs and light trucks. The more leverage you have when using the tool, the easier your job will be.

The Grip 22180 Seal Puller Specs & Features

• Double sided hooks that fits most seals.
• Black oxide coating on hook makes it resistant to rust and corrosion.
• Tool Length: 13 inch for maximum leverage.

The Grip 22180 Seal Puller Impression

No more hammering, no more pounding which could cause damage to the adjoining surface area. With the Grip 22180, all you have to do is insert the tip behind the seal and pull to pry out even the most stubborn seal.

The MSRP for the Grip 22180 seal puller is $5.00 but you can find one online at Toolking for $3.99 only.

The Grip 22280 Windshield Remover Tool Description

I’ve seen quite a few people chipping away at the adhesive caulking in an attempt to dissociate it from the windshield to remove the windshield. Using a knife is not only time consuming but also potentially dangerous as there is a good chance that it might just slip causing an injury to occur. With the Grip 22280, you can forget about using knives and at the same time you can save time and effort.

The Grip 22280 Windshield Remover Tool Specs & Features

• Removes windshields easily by cutting out the adhesive caulking.
• Large knurled handle gives positive grip.

The Grip 22280 Windshield Remover Tool Impression

The Grip 22280 is simple and safe to use. It completely eliminates the use of knives that could be potentially dangerous and in doing so saves the user time and effort.

The MSRP for the Grip 22280 Windshield Remover Tool is $11.99 but you can buy this time saver tool from Toolking for $7.99, a saving of $4.00

The Bondhus 12634 Set of 8 Gorilla Grip Star Fold-Up Keys -Star Tipped Description

Forged from Bondhus’ trademark Protanium steel, the 12634 offers the convenience of a set of 8 star tipped keys bunched together in one package. These blades can be easily used for screw insertion and removal and make for a good replacement for a stardriver. The handle is ergonomically designed and comfortable to hold and the design feature ensures that each blade can be pulled out depending on the specific application without disturbing the others. Typical of Bondhus exacting quality standards, the 12634 features a ProGuard finish that increases resistance to corrosion and rust and increases the life.

The Bondhus 12634 Set of 8 Gorilla Grip Star Fold-Up Keys -Star Tipped Specs & Features

• Protanium technology makes these blades upto 40 times stronger than steel.
• ProGuard finish ensures resistance to rust and corrosion and increases blade life.
• Blades are accessible from both sides; this innovative feature saves time and effort.
• The blades slip in and slide out with ease.
• Blades have a positive stop at 270 degrees.

The Bondhus 12634 Set of 8 Gorilla Grip Star Fold-Up Keys -Star Tipped Impression

A great tool, the Bondhus 12634. Provides the same functionality as hex keys and comes ‘bundled together’ in its own ergonomically designed housing. The Bondhus 12634 is designed and built for the long haul and is designed to save time and effort for the busy professional.

The MSRP for the Bondhus 12634 Set of 8 Gorilla Grip Star Fold-Up Keys -Star Tipped is $14.62 but you can buy these online from Toolking for $9.99 only.

Dear Tami: That is a great question.  Take a deep breathe, there is no wrong decision here.  I am on the board of a local interior design school, so I talk to a lot of designers.  They tell me that whatever you like is what you should go with, but are are some tips:

• Resanding and staining trim is more problematic and more labor intensive than the floor.  So I recommend that you change the floor color, rather than the trim.
• Make sure to have your flooring contractor sand a spot on the floor, and puts actual stain samples on the floor in the space you are going to refinish, before you commit to the color.

I invite you to check out this great article on Matching Hardwood Floor Finishes to Existing Woodwork, which will help you decide on a stain color.

Since metals expand and contract with temperature variations over the time, in some applications it becomes important to drill holes or cut sheet metal with minimal shearing and distortion. In such situations air nibblers which ‘nibble’ through the metals are of great demand, and Mechanics M553C air nibbler punches do a wonderful job.

Mechanics M553C Air Nibbler Punches Description

Built by Mechanics, one of the leading air cutting tools manufacturer in the world, Mechanics M553C air nibbler punches are replacement punches for the powerful air nibbler M552DB model.  These air nibbler punches come two to a pack.

Mechanics M553C Air Nibbler Punches Specifications

• Model Number: M553C
• Weight: 1 pound
• Compatibility: Compatible with Mechanics M552DB Air Nibbler
• Manufacturer: Mechanics

Mechanics M553C Air Nibbler Punches Benefits

Mechanics M553C punches, the high performance replacement punches for Mechanics M552DB air nibbler, are designed to nibble through, instead of shearing or sawing through materials. They can withstand high rates of strokes per minute, often in the range of thousands, very easily. The M553C’s sharp edge lets you nibble through quarter panels without distorting the edges of the metal sheets. It can cut through 16-gauge steel without deforming or blurring the metal.

Mechanics M553C punches are very useful to nibble through aluminum, cold rolled steel, tin, plastic and other metals and materials, offering wide range of choices in using air cutting tools and sheet cutting applications. M553C punches along with powerful M552DB air nibbler is a must-have tool at every paint and auto body shop, tinsmiths and metal shops.

Mechanics M553C punches come in 2-piece a pack with an MSRP of $9.50. But, you can snag these punches for just $4.99 at ToolKing.com.