The Porter-Cable C3151 is a portable Job Boss Oil Free Air Compressor that has 3.5HP. The air tank supports heavy use of brad nailers, staplers and finish/roofing/framing nailers with the 4.5 Gallon storage capacity. The Job Boss Oil-Free Portable Air Compressor is the perfect air compressor for contractors because it has a high flow air regulator as well as a 2-port removable console.

Because the 2-port console is removable, it allows the user the chance to remote air regulation and gain higher air pressure closer to the job site. The pump and motor is protected by a full roll cage frame and has increased portability with the mobility kit for any job site. It also has a regulated air pressure gauge that is large and easy to read.

Porter-Cable C3151 Job Boss Air Compressor Features

• 1.6 running HP
• 4.5 gallon capacity
• Air compressor has a single tank
• 120V/60 Hertz/1 Phase
• Removable 2-port console which allows remote air regulation and higher air pressure taken closer to the job site
• Pump and motor protection provided by full roll cage frame
• Air tank supports heavy use of brad nailers, staplers and finish/roofing/framing nailers with 4.5 Gallon storage capacity
• Regulated air pressure gauge is large and easy to read
• Increased portability with mobility kit on job site

Porter-Cable C3151 Job Boss Air Compressor Includes

• Compressor
• Mobility kit
• ASME safety valve

Porter-Cable C3151 Job Boss Air Compressor Specifications

• Model Number: C3151
• Lubrication: Oil-Free
• SCFM @ 90 PSI: 6.0 SCFM
• Mobility Kit: Yes
• Regulator: Yes, High-flow
• Gauges: 2
• Quick-Connect Couplers: 2
• Tank Size: 4.5 Gallon
• HP: 3.5/1.6 (Peak/Run) HP
• PSI: 150
• CFM: 7.7
• Weight: 94 lb(s)

Porter-Cable C3151 Job Boss Air Compressor Impressions

The Porter-Cable C3151 3.5HP 4.5-Gallon Job Boss Oil-Free Portable Air Compressor is perfect to take to any job because it can be easily transported with the included mobility kit. The Air Compressor has 3.5HP, has a 4.5 Gallon capacity, has a easy to read air pressure gauge. Plus, the motor and pump is protected by the full roll cage frame. This would be the perfect air compressor to have at your job site! The MSRP on the Porter-Cable C3151 is $529.95, but you can buy it for as low as $359.99 at Tool King.

The Chicago Pneumatic CP854 is a 4 Inch Heavy-Duty Angle Grinder with a powerful 0.6 HP high performance motor with a no load speed of 12000 RPMs which provides efficient grinding. The gearing has a spiral bevel in the angle head that provides low vibration and extended life. The Angle Grinder sports a removable dead handle which gives the user access to work in tight quarters. The housing is made of aluminum alloy which makes this angle grinder rugged yet also light weight. The Chicago Pneumatic CP854 has been ergonomically designed to be comfortable which allows the user to have maximum control for easy handling. The Heavy-Duty Angle Grinder is perfect for weld preparation and smoothing, rust removal, and deburring and blending of steel, cast iron, and aluminum.

Chicago Pneumatic CP854 Angle Grinder Features

• Powerful 0.6 HP high performance motor
• Fast and efficient grinding in tight quarters
• Housing is made of aluminum alloy
• Light Weight
• Gearing has a spiral bevel in the angle head that provides low vibration and extended life
• Ergonomically designed to be comfortable which allows the user to have maximum control for easy handling
• Removable dead handle which gives the user access to work in tight quarters

Chicago Pneumatic CP854 Angle Grinder Specifications

• Model Number: CP854
• Spindle size: 3/8-inch-24
• 4-inch wheel size
• No load speed: 12,000 RPM
• Average air consumption: 6 cfm
• Air inlet thread: 1/4-inch NPTF
• Minimum hose size: 3/8-inch
• Sound dBA: 85
• Length: 9-inch
• Weight: 3.75 lbs
• Shipping weight: 5 lb(s)

Chicago Pneumatic CP854 Angle Grinder Impressions

Chicago Pneumatic is known for representing tools and compressors that have been engineered for high performance with high-impact technology which are reliable, and durable. The Chicago Pneumatic CP854 4 Inch Heavy-Duty Angle Grinder would be a great addition because it is reliable and durable. It has a powerful 0.6 HP high performance motor with a no load speed of 12000 RPM’s for efficient grinding. It also has low vibration and a removable dead handle. The housing is made of aluminum alloy which makes this grinder rugged and light weight and has been ergonomically designed to be comfortable. The MSRP on the Chicago Pneumatic CP854 is $470.58, but you can buy it online for as low as $219.99 at Tool King.

The Senco SNS44XP Heavy Wire Construction Stapler provides a blend of power and control. The depth that the SNS44XP drives staples can be adjusted by a simple one screw, one step process allowing you to adjust the depth of the drive by one inch. The main body and high stress area is built of magnesium to strengthen it and increase tool life while keeping the overall tool light. The SNS44XP comes with two methods of actuation. It you are in a hurry you can set it to contact or dual action actuation. This allows you to pull the trigger before placing the workpiece contact on the contact place. Then each time the workpiece contact is depressed the stapler will actuate, placing one staple. for added safety there is also a sequential trigger mode which requires you to first depress the workpiece contact then pull the trigger once per actuation. In addition to these features the SNS44XP also has several comfort features as listed below.

Senco SNS44XP Heavy Wire Stapler Features

• Main Body s built of Magnesium
• Drives 7/16″ crown 16 ga. staples from 1″ – 2″
• Depth of Drive is Adjustable
• Tool Oil Required
• Easy Clear Jam Clearing enables quick and easy clearing of occasional jams
• Two-Year Warranty
• Durable Over-Mold comfort grip
• 360 Degree Adjustable Exhaust
• Overmold trigger
• Reduced weight for less operator fatigue

Senco SNS44XP Heavy Wire Stapler Specifications

• Item #: 3B0101N: Contact Actuation (Dual Action)
• Weight: 4.4 lbs. ( 2 kg)
• Height: 11″ (279.4 mm)
• Length: 14″ (355.6 mm)
• Lip Length: 1″ (25 mm)
• Staple Capacity: 160
• Operating Pressure: 80-120 psi
• Mode of Operation: Tool is available with either sequential
  or contact actuation trigger mechanism
• Hose Fitting: 3 /8″ NPT
• Crown 7/16″ (11 mm)
• Width: .062 (1.57 mm)
• Thickness: .055 (1.4 mm)
• Capacity 160
• Staples: 16 ga. staples from 1″ (25 mm) – 2″ (50 mm)

Senco SNS44XP Heavy Wire Stapler Impression

The Senco SNS44XP Heavy Wire Construction Stapler is an excellent example of an air driven Stapler. The combination of a Magnesium body and the over-mold comfort grip makes it light and easy to handle while still having the power of its high pressure to place staples into whatever materials you are likely to need. The MSRP on this item is $349.00 but you can buy it for as low as $279.99 at Tool King.

The Chicago Pneumatic CP7110K Heavy Duty Air Hammer Kit comes with a vibration isolation system which provides smooth operation and control. The Air Hammer Kit is powerful with 3200 blows per minute as well as a 2.25″ piston stroke. It has fast cutting action which is economical and also sports a cushioned exhaust deflector located on the barrel which adds comfort. For great control over a wide range of jobs, it has a feather trigger for precision start ups. The Chicago Pneumatic CP7110K Heavy Duty Air Hammer Kit is perfect for exhaust work, bolt-cutting, bushing driving, shearing and front-end work. The Heavy Duty Air Hammer Kit comes with 4 chisels, quick change retainer and a molded carrying case.

Chicago Pneumatic CP7110K Air Hammer Features

• Vibration Reduction Mechanism, which is patented, and also reduces vibration 45% over other models
• 3200 blows per minute as well as a 2.25″ piston stroke
• Fast cutting action which is economical
• Feather trigger for precision start ups
• Durable and powerful
• Cushioned exhaust deflector located on barrel for comfort and control

Chicago Pneumatic CP7110K Air Hammer Specifications

• Model Number: CP7110K
• Shank: .401.
• Average air consumption: 3.65 cfm.
• Blows Per Minute (BPM): 3,200
• Stroke Length (in.): 2.63
• Bore Diameter (in.): 3/4
• Shank Diameter (in.): 13/32
• Air Inlet Size (in. NPT): 1/4
• Min. Hose Size (in.): 3/8
• Chisels Included: Yes
• Case Included: Yes
• Tool Weight (lbs.): 3.7
• Shipping Weight: 12 lb(s)

Chicago Pneumatic CP7110K Air Hammer Impression

Chicago Pneumatic is known for representing tools and compressors that have been engineered for high performance with high-impact technology which are reliable, and durable. The Chicago Pneumatic CP7110K Heavy Duty Air Hammer Kit is a great tool for any workshop because it has a smooth operation and is powerful. It is ergonomical, comfortable and offers great control with it’s feather trigger. The MSRP on the Chicago Pneumatic CP7110K is $169.73, but you can buy it for as low as $99.99 at Tool King.

Porter-Cable DA250C 15 Gauge Angle Finish Nailer Description

The Porter-Cable DA250C is a 15 Gauge 1-inch to 2-1/2 Inch Angle Finish Nailer that has a powerful oil free motor. The oil free motor is maintenance free by preventing oil from staining work surfaces. There is an internal piston catch which provides consistent maximum power on every shot, plus a rear exhaust which helps to keep impurities away from work projects. The angle finish nailer has the ability to drive 15 gauge nails ranging in lengths from 1″ to 2 1/2″, and for proper setting of nail heads, it sports a tool free depth-of-drive adjustment with detents. There is a tool free jam release mechanism which removes nails easy, lock off switch with a sequential style trigger and a non-marring nose tip with on tool storage that is removable.

Porter-Cable DA250C 15 Gauge Angle Finish Nailer Features

• Powerful oil free motor is maintenance free, designed to deliver long life
• Consistent maximum power on every shot with internal piston catch
• For proper setting of nail heads, there is a tool free depth-of-drive adjustment with detents
• Drives 15 gauge nails ranging in lengths from 1″ to 2 1/2″
• Easy nail removal with tool free jam release mechanism
• Exhaust is tool free and adjustable to keep contaminates away from the work
• Rear load & lock style magazine
• Lock off switch with a sequential style trigger
• Non-marring nose tip is removable
• Better visibility designed with contact safety
• Belt hook is adjustable
• Rubber grip is incorporated for enhanced comfort
• Driver blade has been specially hardened
• Magnesium body is strong & lightweight

Porter-Cable DA250C 15 Gauge Angle Finish Nailer Includes

• DA250C 15 Gauge 2-1/2 Inch Angle Finish Nailer
• 1,000 15 Gauge 2-Inch brad Nails
• 1/4-Inch Fitting
• Safety Glasses
• Carrying Case

Porter-Cable DA250C 15 Gauge Angle Finish Nailer Specifications

• Model Number: DA250C
• Magazine Capacity: 100 Nails
• Firing Modes: Sequential Fire
• Jam Clearance: Front Opening Quick Release Nose
• Operating Pressure: 70-120 PSI
• Fastener Type: 15 Gauge “DA” Style Angle Finish Nails
• Fastener Range: 1-Inch to 2-1/2 Inch
• Length: 13-Inch
• Height: 11.5-Inch
• Weight: 3.85 lbs
• Weight: 5 lb(s)

Porter-Cable DA250C 15 Gauge Angle Finish Nailer Impressions

The Porter-Cable DA250C 15 Gauge 2-1/2 Inch Angle Finish Nailer has been engineered to be the best angle nailer. It has a powerful oil free motor that is maintenance free, an internal piston catch, a rear exhaust, drives 15 gauge nails ranging in lengths from 1″ to 2 1/2″, a tool free depth-of-drive adjustment with detents, a tool free jam release mechanism, lock off switch with a sequential style trigger and a removable non-marring nose tip. The MSRP on the Porter-Cable DA250C is $358.38, but you can buy it for as low as $179.99 at Tool King.

Chicago Pneumatic CP710 Fine-Point Engraving Pen Description

The Chicago Pneumatic CP710 is a fine point engraving pen that is light weight and easy to use. The stylus is fine point which allows for precise engraving. For extra comfort, there is a finger cushion grip which also makes it easier to use. It also has an average low air consumption of 1 CFM and 14000 blows per minute. The Chicago Pneumatic fine point engraving pen is only 5.25 inches long and weighs 1 1/4 pounds. This fine point Engraving Pen is excellent for engraving your name, creating a design, or logo in your tools or equipment. Can be used on metals, plastics, alloys and wood.

Chicago Pneumatic CP710 Fine-Point Engraving Pen Features

• Light weight and easy to use
• Stylus is fine point which allows for precise engraving
• For extra comfort, there is a finger cushion grip
• Average low air consumption of 1 CFM
• 14000 blows per minute
• 5 1/4 inches long and weighs 1 1/4 pounds

Chicago Pneumatic CP710 Fine-Point Engraving Pen Specifications

• Model Number: CP710
• Blows per minute at 90 PSI: 14,000
• Air Inlet Thread size: 1/4″ NPTF
• Minimum Hose Size: 1/4″
• Vibration Level: 10.5 m/s²
• Sound Pressure dB(A) 65
• Tool Length: 5-1/4″
• CFM: Average Air Consumption: 1 CFM
• Actual Air Consumption at Load: 2.7 CFM
• Noise Level: 65 dBA
• Tool Weight: 2 lb(s)
• Shipping Weight: 3.00 lbs.

Chicago Pneumatic CP710 Fine-Point Engraving Pen Impression

Chicago Pneumatic is known for representing tools and compressors that have been engineered for high performance with high-impact technology which are reliable, and durable. So you know that the Chicago Pneumatic CP710 fine point engraving pen has beenengineered to be the best. The engraving pen is light weight and easy to use, has a stylus that is fine point which allows for precise engraving, and has a finger cushion grip for extra comfort. This fine point engraving tool is perfect for permanently claiming ownership of your tools or equipment. The MSRP on the Chicago Pneumatic CP710 Fine Point Engraving Pen is $92.99, but you can buy it for as low as $66.99 at Tool King.

Chicago Pneumatic CP780 1/4 Inch Air Screwdriver Description

The Chicago Pneumatic CP780 1/4 Inch Air Screwdriver is a pistol grip air screwdriver which features a 1/4-inch female hex chuck size. It has a no load speed of 1,800 RPM, is 8.25-inch in length and is light weight, at 2.5 lbs. There is an exhaust port from the handle that directs air away from the work piece and operator. Plus the clutch has a cushion with external clutch adjustment. There is a convenient forward/reverse valve and there is a quick change chuck that is built-in.

Chicago Pneumatic CP780 Air Screwdriver Features

• Clutch has a cushion with external clutch adjustment
• Quick change chuck is built-in
• Forward/reverse valve is convenient
• General repair and body shop work
• No load Speed 1,800 RPM

Chicago Pneumatic CP780 Air Screwdriver Specifications

• Model Number: CP780
• Torque range: 25-44 in./lbs.
• Sound dBA pressure: 98.3A – 108.3
• Average air consumption: 4 cfm
• Air inlet thread: 1/4-inch NPTF
• Minimum hose size: 3/8-inch
• Sound dBA: 98
• Shipping Weight: 4 lb(s)

Chicago Pneumatic Air Screwdriver CP780 Impressions

Chicago Pneumatic is known for representing tools and compressors that have been engineered for high performance. Chicago Pneumatic tools are engineered with high-impact technology, are reliable, and durable. Chicago Pneumatic values their customers, so you know that any product you get is the best out there. The Chicago Pneumatic CP780 1/4 Inch Air Screwdriver is the best in it’s class. It is lightweight and very versatile. It has an exhaust port to avoid over preasure issues that points away from the normal position of either the user or the peice you are working on.The foward and reverse valve, quick change chuck and an cushion with external clutch adjustment all assist in making this a versatile tool. The MSRP on the Chicago Pneumatic CP780 1/4 Inch Air Screwdriver is $530.05, but you can buy it for as low as $289.99 through Tool King.